RDM Connect EC9014 Bedienungsanleitung PDF herunterladen (Seite 5)

IM9235 - Split2.8 RDM User Guide

Mode of Operation

Split2.8 RDM retransmits two DMX / RDM sources on upto eight of the outputs. Each

output has an input selection switch that will dene which input is connected.

All connections use 5pin XLRs.

DMX Inputs

Both inputs on Split2.8 RDM use a male XLR connector along with a loop through

female XLR connector. The loop through connection must be terminated if not being

used.

Each of the inputs is optically isolated from the outputs and Mains Earth. This isolation

offers protection from potentially dangerous high voltage accidents. It can also

eliminate potential Earth / Ground Differential issues as the input is not electrically

connected to any of the outputs.

DMX Outputs

The DMX512 / RDM Outputs are provided on eight 5pin XLR female connectors. Each

output is independently buffered.

The source of the DMX512 / RDM is selected by the switch to the left of the output

connector.

Each output is capable of driving upto 32 DMX devices. It is not necessary to terminate

the unused outputs.

DMX512 Wiring

XLR Pin RJ45 Pin Convention Function RJ45 Colour

1 7 Black Ground White / Brown

1 8 Black Ground Brown

2 2 Blue Data - Orange

3 1 Red Data + White / Orange

4 6 n/c Aux Data - Green

5 3 n/c Aux Data + White / Green

XLR5 Female

PIN 5

PIN 1

PIN 2

PIN 3

PIN 4

XLR5 Male

PIN 1

PIN 5

PIN 4

PIN 3

PIN 2

1 2 3 4 5 6 7 8

Keine Kommentare

RDM Connect EC9014 Bedienungsanleitung Seite 5